For installation using a traditional adhesive technique, Novoceram Outdoor Plus guarantees an excellent breakage load due to the premium thickness of single-piece slabs. This application represents the ideal solution for floors requiring high carriageable performance (paving driveways, ramps, garages, squares, sidewalks). To avoid detachment of the slab due to structural subsidence within the substrate, it is necessary to use a double-spreading method with grout lines of 5 mm minimum.
Novoceram Outdoor Plus
Installation using an adhesive technique
Video
For installation using a traditional adhesive technique, Novoceram Outdoor Plus guarantees an excellent breakage load due to the premium thickness of single-piece slabs. This application represents the ideal solution for floors requiring high carriageable performance (paving driveways, ramps, garages, squares, sidewalks). To avoid detachment of the slab due to structural subsidence within the substrate, it is necessary to use a double-spreading method with grout lines of 5 mm minimum.
Step by step
Cement footing
Construct a cement footing
Cleaning
Carefully clean the footing before laying
Spreading
Spread the adhesive (type C2) evenly. To avoid the formation of air pockets between the slab and the support, Novoceram advises using the double spreading method
Planarity
Check the planarity during laying
Slabs
Lay the slabs outdoors with a grout line of at least 5 mm
Grouting
After laying, set the slabs with appropriate grouting material
Cleaning
A thorough cleaning is essential to ensure ease of cleaning and resistance of the slabs to stains
Carriageable
Novoceram Outdoor Plus slabs with adhesive installation are carriageable ( light vehicle traffic)
Warning
The recommendations for installation are provided as examples of the type of chosen application: Novoceram recommends to refer to the applicable regulations in your country to carry out a state-of-the-art installation
Cutting Tips
Video
Check out the video for cut tips.
Water-cooled bench mounted power saw
Continual toothed disc suitable for cutting tiles.
Angle grinder
Continual toothed disc suitable for cutting tiles.
