Raised laying

LAYING WITH SUPPORT


>> WARNINGS FOR RAISED LAYING

Novoceram recommends the use of clamps with an height of up to 10 cm.

If a higher cant is required, Novoceram recommends gluing at the bottom of the slab a fiber glass mesh or a galvanised steel, with the aim of preventing the shear failure in the floor in case of slab breakage.

Moreover, Novoceram recommends applying a central foot under each slab, so as to uniformly distribute stresses due to loads of various nature and trampling.

Fixed support

Minimum height from slab: 12 mm. A 3 mm thick levelling disk is available to increase the thickness of one or more areas of the support. The base is perforated at the centre to improve adaptation to the laying surface. The supports can be easily broken into four parts according to the laying scheme and are provided with spacers to create joints between the tiles.

Adjustable support

Fine height adjustment without having to remove the superimposed floor. To lay near corners or walls, break two or four of the support spacers. Near sharp edges, distance the supports from the wall.

Adjustable self-levelling support

The self-levelling support can compensate for gradients of up to 5%. To lay near corners or walls, break two or four of the support spacers. Near sharp edges, distance the supports from the wall.

TwitFollow us on TwitterTwitter
@Novoceram
Novoceram (since 1863) is an important wall and floor ceramic porcelain tiles producer in the #ceramics sector. twitter followers
NEWSLETTER
Enter your e-mail to subscribe.