Novoceram, French ceramics manufacturer since 1863, presents an innovative floating system for interior flooring in colored in body porcelain stoneware that can be installed easily without glue or joint.
The Novoceram Outdoor Plus system allows you to easily lay down the flooring in three different ways: traditional installation on cement screed, floating installation on gravel, sand or grass, without glue or putty, or in a raised installation. This technique can be realized thanks to three different variety of supports: fixed, adjustable or self-leveling.
The slabs of Novoceram Outdoor Plus have a structured surface (R11-R12), they are resistant to temperature variations (from -50 ° C up to + 60 ° C), are easily removable for inspection under the support, and reusable. Even if their weight is reduced compared to that of other flooring for outdoor use (each slab weighs only 17kg), Novoceram Outdoor Plus can guarantee a high resistance to breaking loads (T11 according to EN1339) and aesthetic and technical features unalterable in time.
USE:Exterior floor covering
TECHNOLOGY:Colored in body porcelain stoneware
Azimut Chaud (warm grey concrete effect)
Azimut Froid (cold grey concrete effect)
Cast (Vals stone effect)
Fast Gris (concrete effect)
Fast Sable (ivory grey concrete effect)
Fast Plomb (grey concrete effect)
Geo Gris (grey stone effect)
Geo Ivoire (ivory stone effect)
Icône Bleu (pierre bleue effect)
Kobe Calcite (ivory stone effect)
Kobe Béryl (stone effect)
Kobe Quartz (stone effect)
Noa Flotté Plein Air (brushed and oiled grey oak)
Noa Naturel Plein Air (brushed beige oak)
Samsara Perle Strutturato(light grey stone effect)
Samsara Plomb Strutt.(dark grey stone effect)
Tablon Clair (wood effect)
Tablon Gris (wood effect)
Tablon Naturel (wood effect)
SIZES :60x60cm, 45x90cm, 30x120cm
FINISHES: Structured and anti slip
DECORATIONS AND TRIMS:-
– ISO EN 9001 : standard that defines the requirements for the company’s quality management system in order to achieve ambitious goals and to plan continuous improvements for various phases of corporate processes: customer relations, willingness to listen and talk, internal organisation, relations with suppliers and all the production processes.
– ISO EN 14001 : standard that defines the requirements for the environmental management system, based on ecological commitment and increasingly ambitious goals in terms of process control implemented by the company in order to limit the impact of its activities on the environment and to improve its performance continuously.
– UPEC Classification : allows to know the proper intended use of each tile following the dictates of the ISO standards that define the criteria for determining the resistance of the tiles to high stress, wear and tear, puncture, water, chemicals and stains.
INFORMATION AND INTERVIEWS
Our press office, the whole Novoceram team and Management are at your disposal for any further information or for an interview about the booths, the products or the company. Do not hesitate to contact us at: email@example.com.